Del Valle Polished Concrete Floors for Homes and Warehouses
We do polished concrete in Del Valle and the rest of southeast Travis County. That includes established homes near Elroy and Hornsby Bend, newer neighborhoods in Pilot Knob, and commercial and warehouse buildings along TX-71 near Austin-Bergstrom Airport.
- We cover Del Valle
- An estimator reviews your project
- Based in Austin, 20+ years in the trade
Areas covered
- More than 20 years in the concrete trade
- An estimator reviews your project
- A written scope for your project
- Austin and the Central Texas towns we cover
Sound Familiar?
Homeowners, remodelers, builders, and facility managers around Central Texas often bring us these four problems.
You don't know what's under the floor
Tile or carpet comes up and nobody can say whether that slab will polish well. We check it first, and when the job calls for it we grind a test area, so there's less guessing about the finish.
Polishing, grind and seal, epoxy, and staining all get sold as "shiny concrete"
They're different systems with different upkeep, and we'll tell you which one fits the space instead of selling whatever we installed last week.
Cracks over Central Texas clay
Clay soil that swells and shrinks moves slabs. We can repair and manage cracks before polishing, but polishing won't erase them, and an overlay won't cure the movement. Del Valle sits east of Interstate 35, where deep clay and river bottom soils near the Colorado River are common, so we look closely at crack history here. See how Central Texas clay affects polished floors.
Commercial downtime is a real cost
In retail, office, and warehouse spaces, we can work in zones and stages and give you our honest estimate of when you'll get each area back. We won't just promise to "work around you."
Whatever the worry, we start the same way: we check the slab first, then recommend the system we think fits it best.
Send us photos of your slabConcrete Flooring Services in Del Valle
We do polished concrete in Del Valle and the rest of southeast Travis County. That includes established homes near Elroy and Hornsby Bend, newer neighborhoods in Pilot Knob, and commercial and warehouse buildings along TX-71 near Austin-Bergstrom Airport.
Del Valle projects run the same way as our work on polished concrete floors in Austin, with the same crews and the same written scope.
What We Can Put Down in Del Valle
Core specialty Polished Concrete
We do concrete polishing in Austin on slabs that can take it, grinding and polishing toward the finish we agree on with you.
Read the details
Residential Polished Concrete
We install residential polished concrete in Austin, from remodels to custom builds. When the job calls for it, we grind a sample on your slab before we agree on the finish.
Read the details
Commercial Polished Concrete
We install commercial polished concrete in Austin for retail, office, and warehouse spaces, and we plan the work in stages around how your business runs.
Read the details
Epoxy Flooring
We put down epoxy flooring in Austin over prepared concrete, for commercial spaces and garages where a coating is the right fit.
Read the details
Concrete Overlays
We put down concrete overlays in Austin for slabs that can't be polished as they are, including polishable overlays where they fit.
Read the detailsEvery project starts with an on-site evaluation. Actual scope, pricing, and expected results depend on your specific substrate condition, environment, and project requirements. The website describes our services in general terms. Your signed proposal governs the actual work.
Why Del Valle Property Owners Choose Us
- More than 20 years in the concrete trade
- We check your slab on site before we recommend a finish
- A written scope that lists prep, repairs, how much stone shows, shine level, and treatments
- Separate planning for home finishes and commercial schedules
- A walkthrough of care and cure times when we finish, so you know how to clean the floor from day one
Getting Crews and Equipment to Del Valle
Del Valle is a short drive southeast of downtown along TX-71, so site visits are quick and our crews can plan full working days. Pilot Knob, Elroy, Creedmoor, and Hornsby Bend are all an easy run from our base. Near Austin-Bergstrom International Airport, commercial and warehouse buildings are usually simple to get into, so we can bring bigger diamond grinders and cover more floor per shift.
At a home, we sort out the basics before day one: clear rooms, confirmed power, and a spot for the grinder and dust extraction unit. If people are living or working there during the job, we plan dust control with you, which can mean sealing off the work area and running HEPA dust extraction.
Residential and Commercial Slabs in Del Valle
Del Valle homes range from established ranch houses to newer subdivisions, and the slabs vary just as much. Older homes near Elroy and Hornsby Bend often have tile or carpet over the slab. We take the glue and tile mortar off first, then check the slab before we agree on a finish. Newer homes in Pilot Knob, built on slabs poured right on the ground, tend to have flatter, more even concrete. That kind of slab suits a cream finish, where almost no stone shows, or salt and pepper, where fine flecks of stone come through.
Along TX-71 and SH-130 we also polish warehouse and commercial floors, many in buildings that serve the airport and the Circuit of the Americas area. These often need a lithium silicate hardener and filled joints, and we can split the work up around business hours.
Areas we cover here
We don't run a showroom or office in Del Valle. All the work happens at your property, and if the job calls for samples or mockups, we bring them when we visit.
How a Polished Concrete Project Runs
Most jobs go through four steps between your first photos and the first day of grinding, and we don't like to rush them.
-
Send details and photos
Your floor area, how you use the space, what's on the floor now, and a few photos of the slab. That's usually enough for a first read on whether polishing is realistic.
-
We check the slab
On site we look at things like hardness, how deep the stone sits, flatness, anything soaked into the concrete, cracks, and old repairs. When the job calls for it, we grind a small test area so you can see your own concrete polished before you choose.
-
We talk through which systems fit
Mechanical polishing, grind and seal, an epoxy coating, or a polishable overlay. We'll make a clear recommendation, even when it's a different system from the one you asked about.
-
Written scope, then the work
Prep, repairs, the finish, treatments, phasing, and anything left out of the job all go on paper first. Then our crew does the work as written. We'll go over dust control for your space during the consultation.
Not sure whether your slab should be polished, overlaid, or coated?
Send us photos and a rough floor area. One of our estimators usually looks them over within 24 business hours and gives you a straight answer.
What Customers Tell Us
Here's what some of our customers have said.
“We removed dated tile in our Barton Creek remodel. The team prepped the uneven slab, walked us through our options, and we ended up with a satin cream finish we really like.”
“As a commercial GC, it's rare to find a flooring trade in Austin that explains the prep and testing this well. They kept us updated on the schedule the whole way through.”
“Honest and straightforward. They tested our 1980s slab, showed us a sample mockup, and explained why polishing suited our open living space better than epoxy.”
Individual results vary based on use, maintenance, and environmental conditions.
Del Valle Questions
Do you polish concrete floors in Del Valle and Pilot Knob?
How much does concrete floor polishing cost in Del Valle?
Can the slab under tile or carpet in a Del Valle home be polished?
Can you work around a Del Valle business that stays open?
How soon can an estimator review my Del Valle project?
Is polished concrete a good choice for every Del Valle home?
Where can I find a concrete polishing specialist near Del Valle?
Still have a question about your floor?
Send it our way, with photos if you have them. We'll get back to you as soon as we can with a straight answer, whether or not you hire us.
Get My Polished Concrete QuoteNear Del Valle
We schedule nearby communities together, which keeps travel down and makes site visits easy to set up.
Polished concrete in Del Valle?
Tell us roughly how big the floor is and how you use it, and add a few photos of the slab. We'll look it over and get back to you with a next step.
- We check your slab before we quote
- Your signed proposal spells out what's not included
- We walk you through care in person when the job is done