Polished Concrete Floors in Pflugerville, TX
Our polished concrete jobs in Pflugerville run from home remodels in Falcon Pointe, Blackhawk, and Avalon to warehouse and industrial floors along SH-130. Older homes near Pecan Street and newer builds across town are both a quick drive from our Austin base.
- We cover Pflugerville
- An estimator reviews your project
- Based in Austin, 20+ years in the trade
Areas covered
- More than 20 years in the concrete trade
- An estimator reviews your project
- A written scope for your project
- Austin and the Central Texas towns we cover
Sound Familiar?
Homeowners, remodelers, builders, and facility managers around Central Texas often bring us these four problems.
You don't know what's under the floor
Tile or carpet comes up and nobody can say whether that slab will polish well. We check it first, and when the job calls for it we grind a test area, so there's less guessing about the finish.
Polishing, grind and seal, epoxy, and staining all get sold as "shiny concrete"
They're different systems with different upkeep, and we'll tell you which one fits the space instead of selling whatever we installed last week.
Cracks over Central Texas clay
Clay soil that swells and shrinks moves slabs. We can repair and manage cracks before polishing, but polishing won't erase them, and an overlay won't cure the movement. Most of Pflugerville sits east of Interstate 35 on Blackland Prairie clay, which is deep and dense, so we look closely at crack history here. See how Central Texas clay affects polished floors.
Commercial downtime is a real cost
In retail, office, and warehouse spaces, we can work in zones and stages and give you our honest estimate of when you'll get each area back. We won't just promise to "work around you."
Whatever the worry, we start the same way: we check the slab first, then recommend the system we think fits it best.
Send us photos of your slabConcrete Flooring Services in Pflugerville
Our polished concrete jobs in Pflugerville run from home remodels in Falcon Pointe, Blackhawk, and Avalon to warehouse and industrial floors along SH-130. Older homes near Pecan Street and newer builds across town are both a quick drive from our Austin base.
The crews and written scopes behind our polished concrete floors in Austin handle Pflugerville too, since it's a short run up the road.
What We Can Put Down in Pflugerville
Core specialty Polished Concrete
We do concrete polishing in Austin on slabs that can take it, grinding and polishing toward the finish we agree on with you.
Read the details
Residential Polished Concrete
We install residential polished concrete in Austin, from remodels to custom builds. When the job calls for it, we grind a sample on your slab before we agree on the finish.
Read the details
Commercial Polished Concrete
We install commercial polished concrete in Austin for retail, office, and warehouse spaces, and we plan the work in stages around how your business runs.
Read the details
Epoxy Flooring
We put down epoxy flooring in Austin over prepared concrete, for commercial spaces and garages where a coating is the right fit.
Read the details
Concrete Overlays
We put down concrete overlays in Austin for slabs that can't be polished as they are, including polishable overlays where they fit.
Read the detailsEvery project starts with an on-site evaluation. Actual scope, pricing, and expected results depend on your specific substrate condition, environment, and project requirements. The website describes our services in general terms. Your signed proposal governs the actual work.
Why Pflugerville Property Owners Choose Us
- A short drive from our Austin base, so site visits and return trips are easy
- We treat home, commercial, and industrial floors as different kinds of work
- Joint filling and a hardener when the floor and its traffic call for them
- Dust control planned with you in buildings that stay in use
- A written scope that spells out what's included and what isn't, before work starts
Working in Pflugerville
Pflugerville is a short run northeast of Austin. Falcon Pointe, Blackhawk, Avalon, Windermere, and the older neighborhoods off Pecan Street and Dessau Road are all close for our crews. Warehouse, distribution, and flex space jobs near SH-130 and Grand Avenue Parkway are easy to get equipment into. That lets us bring bigger floor grinders and cover more floor per shift.
For retail and office floors near Stone Hill Town Center, we can split the work up around business hours, with dust extraction on the grinders. Homes in Spring Trails, Wells Branch, and the established neighborhoods near downtown Pflugerville need clear rooms and confirmed power.
What We Find in Pflugerville Slabs
Newer homes in Falcon Pointe, Blackhawk, and Avalon usually sit on flat, properly cured slabs poured right on the ground. Most take either a cream finish, with almost no stone showing, or salt and pepper, with fine flecks of stone. A lithium silicate hardener often goes on at the end. Older single family homes near Pecan Street and downtown Pflugerville may have tile glue, carpet tack strips, or paint on the slab, so we check it first. If the slab can't be polished as it is, a polishable concrete overlay can give you a fresh surface for the finish you want.
On the commercial side, distribution centers and flex space floors near SH-130 often need filled joints and a hardener for forklift and wheel traffic. We plan the work around how your business runs.
Areas we cover here
Without a Pflugerville showroom or office, we do things the other way around: when the job calls for samples or mockups, they come to you.
How a Polished Concrete Project Runs
Most jobs go through four steps between your first photos and the first day of grinding, and we don't like to rush them.
-
Send details and photos
Your floor area, how you use the space, what's on the floor now, and a few photos of the slab. That's usually enough for a first read on whether polishing is realistic.
-
We check the slab
On site we look at things like hardness, how deep the stone sits, flatness, anything soaked into the concrete, cracks, and old repairs. When the job calls for it, we grind a small test area so you can see your own concrete polished before you choose.
-
We talk through which systems fit
Mechanical polishing, grind and seal, an epoxy coating, or a polishable overlay. We'll make a clear recommendation, even when it's a different system from the one you asked about.
-
Written scope, then the work
Prep, repairs, the finish, treatments, phasing, and anything left out of the job all go on paper first. Then our crew does the work as written. We'll go over dust control for your space during the consultation.
Not sure whether your slab should be polished, overlaid, or coated?
Send us photos and a rough floor area. One of our estimators usually looks them over within 24 business hours and gives you a straight answer.
What Customers Tell Us
Here's what some of our customers have said.
“We removed dated tile in our Barton Creek remodel. The team prepped the uneven slab, walked us through our options, and we ended up with a satin cream finish we really like.”
“As a commercial GC, it's rare to find a flooring trade in Austin that explains the prep and testing this well. They kept us updated on the schedule the whole way through.”
“Honest and straightforward. They tested our 1980s slab, showed us a sample mockup, and explained why polishing suited our open living space better than epoxy.”
Individual results vary based on use, maintenance, and environmental conditions.
Pflugerville Questions
How much does polished concrete cost in Pflugerville?
What are the downsides of polished concrete floors?
Is polished concrete cheaper than tile for a Pflugerville home?
Do you polish warehouse and industrial floors in Pflugerville?
Can the slab in a newer Pflugerville home be polished?
How much does polishing disrupt a Pflugerville building that stays open?
Where can I find a concrete floor specialist near Pflugerville?
How do I start a polished concrete quote in Pflugerville?
Still have a question about your floor?
Send it our way, with photos if you have them. We'll get back to you as soon as we can with a straight answer, whether or not you hire us.
Get My Polished Concrete QuoteNear Pflugerville
We schedule nearby communities together, which keeps travel down and makes site visits easy to set up.
Polished concrete in Pflugerville?
Tell us roughly how big the floor is and how you use it, and add a few photos of the slab. We'll look it over and get back to you with a next step.
- We check your slab before we quote
- Your signed proposal spells out what's not included
- We walk you through care in person when the job is done