Polished Concrete Floors in Round Rock, TX
We do polished concrete in Round Rock, from home remodels in Brushy Creek, Teravista, and Forest Creek to commercial and retail buildouts along Interstate 35 and University Boulevard. We start each one by looking at the slab in person. Then we agree on the look, with a sample or mockup if the job needs one, and write the scope before any grinding.
- We cover Round Rock
- An estimator reviews your project
- Based in Austin, 20+ years in the trade
Areas covered
- More than 20 years in the concrete trade
- An estimator reviews your project
- A written scope for your project
- Austin and the Central Texas towns we cover
Sound Familiar?
Homeowners, remodelers, builders, and facility managers around Central Texas often bring us these four problems.
You don't know what's under the floor
Tile or carpet comes up and nobody can say whether that slab will polish well. We check it first, and when the job calls for it we grind a test area, so there's less guessing about the finish.
Polishing, grind and seal, epoxy, and staining all get sold as "shiny concrete"
They're different systems with different upkeep, and we'll tell you which one fits the space instead of selling whatever we installed last week.
Cracks over Central Texas clay
Clay soil that swells and shrinks moves slabs. We can repair and manage cracks before polishing, but polishing won't erase them, and an overlay won't cure the movement. Round Rock straddles Interstate 35. Slabs on the west side often sit on thin soil over limestone, while the east side has deeper Blackland Prairie clay. See how Central Texas clay affects polished floors.
Commercial downtime is a real cost
In retail, office, and warehouse spaces, we can work in zones and stages and give you our honest estimate of when you'll get each area back. We won't just promise to "work around you."
Whatever the worry, we start the same way: we check the slab first, then recommend the system we think fits it best.
Send us photos of your slabConcrete Flooring Services in Round Rock
We do polished concrete in Round Rock, from home remodels in Brushy Creek, Teravista, and Forest Creek to commercial and retail buildouts along Interstate 35 and University Boulevard. We start each one by looking at the slab in person. Then we agree on the look, with a sample or mockup if the job needs one, and write the scope before any grinding.
Everything behind our polished concrete floors in Austin carries over to Round Rock, from the crews to the written scope.
What We Install in Round Rock
Core specialty Polished Concrete
We do concrete polishing in Austin on slabs that can take it, grinding and polishing toward the finish we agree on with you.
Read the details
Residential Polished Concrete
We install residential polished concrete in Austin, from remodels to custom builds. When the job calls for it, we grind a sample on your slab before we agree on the finish.
Read the details
Commercial Polished Concrete
We install commercial polished concrete in Austin for retail, office, and warehouse spaces, and we plan the work in stages around how your business runs.
Read the details
Epoxy Flooring
We put down epoxy flooring in Austin over prepared concrete, for commercial spaces and garages where a coating is the right fit.
Read the details
Concrete Overlays
We put down concrete overlays in Austin for slabs that can't be polished as they are, including polishable overlays where they fit.
Read the detailsEvery project starts with an on-site evaluation. Actual scope, pricing, and expected results depend on your specific substrate condition, environment, and project requirements. The website describes our services in general terms. Your signed proposal governs the actual work.
Why Round Rock Property Owners Choose Us
- More than 20 years in the concrete trade
- We check your slab on site before we recommend a finish
- A written scope that lists prep, repairs, how much stone shows, shine level, and treatments
- Separate planning for home finishes and commercial schedules
- A walkthrough of care and cure times when we finish, so you know how to clean the floor from day one
Working in Round Rock
Round Rock sits about 17 miles north of downtown Austin along I-35. We try to head up early, so our crews reach Brushy Creek, Teravista, Cat Hollow, Forest Creek, and the La Frontera commercial area before traffic builds. Our equipment can include grinders, dust extraction, and water containment. So before day one, we need a parking spot near the entry and confirmed power. Retail and flex space off University Boulevard, Hesters Crossing, or near Round Rock Premium Outlets often stays open during the work. We can handle those in sections, working outside business hours.
What We Find in Round Rock Slabs
We mostly see two kinds of slab here. The first is in newer homes and flex buildings in places like Teravista. Those slabs are usually flat and properly cured. Cream, where almost no stone shows, and salt and pepper, where fine flecks of stone show through, both work on them. They often get a lithium silicate hardener at the end.
The second kind is in older homes in central Round Rock, often with tile or carpet over a slab from the 1980s or 90s. That means we remove glue and check patches before anyone talks about a finish.
Warehouse, industrial, and retail floors near the SH-45 and I-35 junction often need the joints filled as part of the polishing plan. When heavy traffic or chemicals matter more than looks, the honest call is sealed concrete or grind and seal (a light grind with a sealer on top).
Areas we cover here
We don't keep a showroom or office in Round Rock. The work happens at your home or business, and that's where we bring any samples or mockups the job needs.
How a Polished Concrete Project Runs
Most jobs go through four steps between your first photos and the first day of grinding, and we don't like to rush them.
-
Send details and photos
Your floor area, how you use the space, what's on the floor now, and a few photos of the slab. That's usually enough for a first read on whether polishing is realistic.
-
We check the slab
On site we look at things like hardness, how deep the stone sits, flatness, anything soaked into the concrete, cracks, and old repairs. When the job calls for it, we grind a small test area so you can see your own concrete polished before you choose.
-
We talk through which systems fit
Mechanical polishing, grind and seal, an epoxy coating, or a polishable overlay. We'll make a clear recommendation, even when it's a different system from the one you asked about.
-
Written scope, then the work
Prep, repairs, the finish, treatments, phasing, and anything left out of the job all go on paper first. Then our crew does the work as written. We'll go over dust control for your space during the consultation.
Not sure whether your slab should be polished, overlaid, or coated?
Send us photos and a rough floor area. One of our estimators usually looks them over within 24 business hours and gives you a straight answer.
What Customers Tell Us
Here's what some of our customers have said.
“We removed dated tile in our Barton Creek remodel. The team prepped the uneven slab, walked us through our options, and we ended up with a satin cream finish we really like.”
“As a commercial GC, it's rare to find a flooring trade in Austin that explains the prep and testing this well. They kept us updated on the schedule the whole way through.”
“Honest and straightforward. They tested our 1980s slab, showed us a sample mockup, and explained why polishing suited our open living space better than epoxy.”
Individual results vary based on use, maintenance, and environmental conditions.
Round Rock Questions
Do you polish concrete in Round Rock and Brushy Creek?
How soon can an estimator look at my Round Rock slab?
Can the slab under my Round Rock home's tile be polished?
Can you work around a Round Rock business that stays open?
Is there a Round Rock office or showroom to visit?
How much does polished concrete cost in Round Rock?
What are the downsides of polished concrete floors?
Is polished concrete cheaper than tile for a Round Rock home?
Where can I find a concrete floor specialist near Round Rock?
Still have a question about your floor?
Send it our way, with photos if you have them. We'll get back to you as soon as we can with a straight answer, whether or not you hire us.
Get My Polished Concrete QuoteNear Round Rock
We schedule nearby communities together, which keeps travel down and makes site visits easy to set up.
Polished concrete in Round Rock?
Tell us roughly how big the floor is and how you use it, and add a few photos of the slab. We'll look it over and get back to you with a next step.
- We check your slab before we quote
- Your signed proposal spells out what's not included
- We walk you through care in person when the job is done