West Lake Hills Polished Concrete Floor Specialists
In West Lake Hills, our work runs from architectural custom homes along Westlake Drive and Lost Creek Boulevard to established homes in Rollingwood and the Eanes community. Before any grinding on a polished concrete floor in West Lake Hills, we look at the slab in person, agree on the look, and put the scope in writing. We add a mockup when the job needs one.
- We cover West Lake Hills
- An estimator reviews your project
- Based in Austin, 20+ years in the trade
Areas covered
- More than 20 years in the concrete trade
- An estimator reviews your project
- A written scope for your project
- Austin and the Central Texas towns we cover
Sound Familiar?
Homeowners, remodelers, builders, and facility managers around Central Texas often bring us these four problems.
You don't know what's under the floor
Tile or carpet comes up and nobody can say whether that slab will polish well. We check it first, and when the job calls for it we grind a test area, so there's less guessing about the finish.
Polishing, grind and seal, epoxy, and staining all get sold as "shiny concrete"
They're different systems with different upkeep, and we'll tell you which one fits the space instead of selling whatever we installed last week.
Cracks over Central Texas clay
Clay soil that swells and shrinks moves slabs. We can repair and manage cracks before polishing, but polishing won't erase them, and an overlay won't cure the movement. West Lake Hills sits west of Interstate 35, where soil is often thin over limestone. Pockets of clay and lots built up with fill can still move a slab, so we check crack history here too. See how Central Texas clay affects polished floors.
Commercial downtime is a real cost
In retail, office, and warehouse spaces, we can work in zones and stages and give you our honest estimate of when you'll get each area back. We won't just promise to "work around you."
Whatever the worry, we start the same way: we check the slab first, then recommend the system we think fits it best.
Send us photos of your slabConcrete Flooring Services in West Lake Hills
In West Lake Hills, our work runs from architectural custom homes along Westlake Drive and Lost Creek Boulevard to established homes in Rollingwood and the Eanes community. Before any grinding on a polished concrete floor in West Lake Hills, we look at the slab in person, agree on the look, and put the scope in writing. We add a mockup when the job needs one.
The crews and written scopes behind our polished concrete floors in Austin are the same ones we bring to West Lake Hills and Rollingwood homes.
What We Can Install in West Lake Hills
Core specialty Polished Concrete
We do concrete polishing in Austin on slabs that can take it, grinding and polishing toward the finish we agree on with you.
Read the details
Residential Polished Concrete
We install residential polished concrete in Austin, from remodels to custom builds. When the job calls for it, we grind a sample on your slab before we agree on the finish.
Read the details
Commercial Polished Concrete
We install commercial polished concrete in Austin for retail, office, and warehouse spaces, and we plan the work in stages around how your business runs.
Read the details
Epoxy Flooring
We put down epoxy flooring in Austin over prepared concrete, for commercial spaces and garages where a coating is the right fit.
Read the details
Concrete Overlays
We put down concrete overlays in Austin for slabs that can't be polished as they are, including polishable overlays where they fit.
Read the detailsEvery project starts with an on-site evaluation. Actual scope, pricing, and expected results depend on your specific substrate condition, environment, and project requirements. The website describes our services in general terms. Your signed proposal governs the actual work.
How We Work With Homeowners and Architects
- When the job calls for a mockup, you approve the look before we do the whole floor
- We work with your architect and builder on the finish
- Straight talk about natural variation in concrete color and stone
- A plan to protect nearby finished surfaces while we grind
- We work in West Lake Hills and Rollingwood homes
Planning Access on West Lake Hills Hillsides
West Lake Hills and Rollingwood sit minutes west of central Austin along Bee Cave Road (RM 2244). But hillside driveways off Westlake Drive, Lost Creek Boulevard, and the streets above Loop 360 mean we plan access carefully. Before the first grinding day, we confirm how the equipment gets in, how we'll protect nearby finished surfaces, and where we'll set up. Architect and builder walkthroughs are common on custom homes in the Eanes community, and we plan any mockup review around their schedule. We book nearby Lakeway and Barton Creek jobs on the same western route.
Architectural Slabs and Custom Pours We Look At
Architectural homes in West Lake Hills and Rollingwood often have slabs poured with a specific look in mind, and there's little room for variation. That's why mockup approval matters so much: concrete color and where the stone sits vary even within one pour. We also look at high end remodels where an older slab under stone or tile needs an honest check before anyone commits to a finish.
On custom builds near Lake Austin and along the Barton Creek greenbelt, we can plan with you before the pour. The concrete mix, how flat it's finished, and how it cures all affect the polished result.
Areas we cover here
Any mockups or samples your job needs come to your home or business in West Lake Hills, since we have no showroom or office there.
How a Polished Concrete Project Runs
Most jobs go through four steps between your first photos and the first day of grinding, and we don't like to rush them.
-
Send details and photos
Your floor area, how you use the space, what's on the floor now, and a few photos of the slab. That's usually enough for a first read on whether polishing is realistic.
-
We check the slab
On site we look at things like hardness, how deep the stone sits, flatness, anything soaked into the concrete, cracks, and old repairs. When the job calls for it, we grind a small test area so you can see your own concrete polished before you choose.
-
We talk through which systems fit
Mechanical polishing, grind and seal, an epoxy coating, or a polishable overlay. We'll make a clear recommendation, even when it's a different system from the one you asked about.
-
Written scope, then the work
Prep, repairs, the finish, treatments, phasing, and anything left out of the job all go on paper first. Then our crew does the work as written. We'll go over dust control for your space during the consultation.
Not sure whether your slab should be polished, overlaid, or coated?
Send us photos and a rough floor area. One of our estimators usually looks them over within 24 business hours and gives you a straight answer.
What Customers Tell Us
Here's what some of our customers have said.
“We removed dated tile in our Barton Creek remodel. The team prepped the uneven slab, walked us through our options, and we ended up with a satin cream finish we really like.”
“As a commercial GC, it's rare to find a flooring trade in Austin that explains the prep and testing this well. They kept us updated on the schedule the whole way through.”
“Honest and straightforward. They tested our 1980s slab, showed us a sample mockup, and explained why polishing suited our open living space better than epoxy.”
Individual results vary based on use, maintenance, and environmental conditions.
West Lake Hills Questions
Do you serve West Lake Hills and Rollingwood?
Can you match the exact finish our architect called for?
How much color variation should we expect in polished concrete?
How much does polished concrete cost in West Lake Hills?
Can polished concrete work with radiant heating?
Will equipment fit a hillside driveway in West Lake Hills?
How long does a polishing project take in West Lake Hills?
Where can I find a concrete floor specialist near West Lake Hills?
Still have a question about your floor?
Send it our way, with photos if you have them. We'll get back to you as soon as we can with a straight answer, whether or not you hire us.
Get My Polished Concrete QuoteNear West Lake Hills
We schedule nearby communities together, which keeps travel down and makes site visits easy to set up.
Polished concrete in West Lake Hills?
Tell us roughly how big the floor is and how you use it, and add a few photos of the slab. We'll look it over and get back to you with a next step.
- We check your slab before we quote
- Your signed proposal spells out what's not included
- We walk you through care in person when the job is done