Polished Concrete Floors in Cedar Park, TX
We do polished concrete in Cedar Park, from Buttercup Creek and Anderson Mill West to newer custom builds near Toll 183A. Some jobs are in older tract homes, where the flooring comes up and we work with the slab underneath. On new homes, we can plan the polished floor with the builder before the pour.
- We cover Cedar Park
- An estimator reviews your project
- Based in Austin, 20+ years in the trade
Areas covered
- More than 20 years in the concrete trade
- An estimator reviews your project
- A written scope for your project
- Austin and the Central Texas towns we cover
Sound Familiar?
Homeowners, remodelers, builders, and facility managers around Central Texas often bring us these four problems.
You don't know what's under the floor
Tile or carpet comes up and nobody can say whether that slab will polish well. We check it first, and when the job calls for it we grind a test area, so there's less guessing about the finish.
Polishing, grind and seal, epoxy, and staining all get sold as "shiny concrete"
They're different systems with different upkeep, and we'll tell you which one fits the space instead of selling whatever we installed last week.
Cracks over Central Texas clay
Clay soil that swells and shrinks moves slabs. We can repair and manage cracks before polishing, but polishing won't erase them, and an overlay won't cure the movement. Cedar Park sits west of Interstate 35, where soil is often thin over limestone. Pockets of clay and built up lots can still move a slab, so we check crack history here too. See how Central Texas clay affects polished floors.
Commercial downtime is a real cost
In retail, office, and warehouse spaces, we can work in zones and stages and give you our honest estimate of when you'll get each area back. We won't just promise to "work around you."
Whatever the worry, we start the same way: we check the slab first, then recommend the system we think fits it best.
Send us photos of your slabConcrete Flooring Services in Cedar Park
We do polished concrete in Cedar Park, from Buttercup Creek and Anderson Mill West to newer custom builds near Toll 183A. Some jobs are in older tract homes, where the flooring comes up and we work with the slab underneath. On new homes, we can plan the polished floor with the builder before the pour.
The crews who handle our polished concrete floors in Austin also work Cedar Park, and they write the scope the same way here.
Floors We Install in Cedar Park
Core specialty Polished Concrete
We do concrete polishing in Austin on slabs that can take it, grinding and polishing toward the finish we agree on with you.
Read the details
Residential Polished Concrete
We install residential polished concrete in Austin, from remodels to custom builds. When the job calls for it, we grind a sample on your slab before we agree on the finish.
Read the details
Commercial Polished Concrete
We install commercial polished concrete in Austin for retail, office, and warehouse spaces, and we plan the work in stages around how your business runs.
Read the details
Epoxy Flooring
We put down epoxy flooring in Austin over prepared concrete, for commercial spaces and garages where a coating is the right fit.
Read the details
Concrete Overlays
We put down concrete overlays in Austin for slabs that can't be polished as they are, including polishable overlays where they fit.
Read the detailsEvery project starts with an on-site evaluation. Actual scope, pricing, and expected results depend on your specific substrate condition, environment, and project requirements. The website describes our services in general terms. Your signed proposal governs the actual work.
Why Cedar Park Homeowners and Builders Work With Us
- We're diamond polishing specialists, not a general flooring contractor
- When the job calls for one, you see a sample or mockup before we settle on a finish
- A straight answer on what polishing can and can't fix
- We work with builders on new Cedar Park and Williamson County homes
- A written scope that lists what's included and what isn't
How We Schedule Cedar Park Jobs
Cedar Park is a straight run up US-183 from Austin. That puts our crews in Buttercup Creek, Anderson Mill West, Twin Creeks, or the Bell Boulevard commercial strip early enough for a full grinding day. Inside a home we need the rooms cleared, so we agree ahead of time on who moves the furniture and where our equipment goes. If you're staying in the house during the work, we can seal off the work area and run HEPA dust extraction on the grinders, depending on the job. For retail and gym spaces along Bell Boulevard or near 1890 Ranch, we can work in zones outside business hours.
What Slabs Look Like in Older and Newer Homes
A lot of Cedar Park homes are tract houses from the 1980s and 90s, in neighborhoods like Buttercup Creek and Anderson Mill West. The slabs under them are often sound. Once the carpet and tack strips come out, that's usually a decent base for a salt and pepper finish, where fine flecks of stone show through. With newer custom builds near Toll 183A and Avery Ranch, we can plan the pour itself. That matters, because the mix, how flat it's finished, and the cure all show up in the polished floor.
Areas we cover here
You won't find a Cedar Park showroom or office, because we don't keep one. When a job calls for samples or mockups, we bring them to your home or business instead.
How a Polished Concrete Project Runs
Most jobs go through four steps between your first photos and the first day of grinding, and we don't like to rush them.
-
Send details and photos
Your floor area, how you use the space, what's on the floor now, and a few photos of the slab. That's usually enough for a first read on whether polishing is realistic.
-
We check the slab
On site we look at things like hardness, how deep the stone sits, flatness, anything soaked into the concrete, cracks, and old repairs. When the job calls for it, we grind a small test area so you can see your own concrete polished before you choose.
-
We talk through which systems fit
Mechanical polishing, grind and seal, an epoxy coating, or a polishable overlay. We'll make a clear recommendation, even when it's a different system from the one you asked about.
-
Written scope, then the work
Prep, repairs, the finish, treatments, phasing, and anything left out of the job all go on paper first. Then our crew does the work as written. We'll go over dust control for your space during the consultation.
Not sure whether your slab should be polished, overlaid, or coated?
Send us photos and a rough floor area. One of our estimators usually looks them over within 24 business hours and gives you a straight answer.
What Customers Tell Us
Here's what some of our customers have said.
“We removed dated tile in our Barton Creek remodel. The team prepped the uneven slab, walked us through our options, and we ended up with a satin cream finish we really like.”
“As a commercial GC, it's rare to find a flooring trade in Austin that explains the prep and testing this well. They kept us updated on the schedule the whole way through.”
“Honest and straightforward. They tested our 1980s slab, showed us a sample mockup, and explained why polishing suited our open living space better than epoxy.”
Individual results vary based on use, maintenance, and environmental conditions.
Cedar Park Questions
Do you serve Cedar Park and Buttercup Creek?
We're building a new Cedar Park home. When should we call?
Can you polish the slab after we pull up carpet?
How much does concrete floor polishing cost in Cedar Park?
Will polishing fix an uneven Cedar Park floor?
How long will our Cedar Park floor be out of use?
Where can I find a concrete polishing specialist near Cedar Park?
Is polished concrete cheaper than tile for a Cedar Park home?
How do you clean and maintain a polished concrete floor?
Still have a question about your floor?
Send it our way, with photos if you have them. We'll get back to you as soon as we can with a straight answer, whether or not you hire us.
Get My Polished Concrete QuoteNear Cedar Park
We schedule nearby communities together, which keeps travel down and makes site visits easy to set up.
Polished concrete in Cedar Park?
Tell us roughly how big the floor is and how you use it, and add a few photos of the slab. We'll look it over and get back to you with a next step.
- We check your slab before we quote
- Your signed proposal spells out what's not included
- We walk you through care in person when the job is done