Leander Polished Concrete Floor Specialists
We handle polished concrete in Leander homes and businesses, and across the rest of Williamson County. Most Leander floors we're called to are newer slabs in communities like Crystal Falls, Travisso, and Mason Hills. So the job here is usually about planning the finish and working with the builder, not restoring an old floor.
- We cover Leander
- An estimator reviews your project
- Based in Austin, 20+ years in the trade
Areas covered
- More than 20 years in the concrete trade
- An estimator reviews your project
- A written scope for your project
- Austin and the Central Texas towns we cover
Sound Familiar?
Homeowners, remodelers, builders, and facility managers around Central Texas often bring us these four problems.
You don't know what's under the floor
Tile or carpet comes up and nobody can say whether that slab will polish well. We check it first, and when the job calls for it we grind a test area, so there's less guessing about the finish.
Polishing, grind and seal, epoxy, and staining all get sold as "shiny concrete"
They're different systems with different upkeep, and we'll tell you which one fits the space instead of selling whatever we installed last week.
Cracks over Central Texas clay
Clay soil that swells and shrinks moves slabs. We can repair and manage cracks before polishing, but polishing won't erase them, and an overlay won't cure the movement. Leander sits west of Interstate 35, where soil is often thin over limestone. Pockets of clay and lots built up with fill can still move a slab, so we check crack history here too. See how Central Texas clay affects polished floors.
Commercial downtime is a real cost
In retail, office, and warehouse spaces, we can work in zones and stages and give you our honest estimate of when you'll get each area back. We won't just promise to "work around you."
Whatever the worry, we start the same way: we check the slab first, then recommend the system we think fits it best.
Send us photos of your slabConcrete Flooring Services in Leander
We handle polished concrete in Leander homes and businesses, and across the rest of Williamson County. Most Leander floors we're called to are newer slabs in communities like Crystal Falls, Travisso, and Mason Hills. So the job here is usually about planning the finish and working with the builder, not restoring an old floor.
The crews that install our polished concrete floors in Austin drive up US-183 for Leander jobs, and they work from the same kind of written scope.
What We Install in Leander
Core specialty Polished Concrete
We do concrete polishing in Austin on slabs that can take it, grinding and polishing toward the finish we agree on with you.
Read the details
Residential Polished Concrete
We install residential polished concrete in Austin, from remodels to custom builds. When the job calls for it, we grind a sample on your slab before we agree on the finish.
Read the details
Commercial Polished Concrete
We install commercial polished concrete in Austin for retail, office, and warehouse spaces, and we plan the work in stages around how your business runs.
Read the details
Epoxy Flooring
We put down epoxy flooring in Austin over prepared concrete, for commercial spaces and garages where a coating is the right fit.
Read the details
Concrete Overlays
We put down concrete overlays in Austin for slabs that can't be polished as they are, including polishable overlays where they fit.
Read the detailsEvery project starts with an on-site evaluation. Actual scope, pricing, and expected results depend on your specific substrate condition, environment, and project requirements. The website describes our services in general terms. Your signed proposal governs the actual work.
Why Leander Builders and Homeowners Call Us
- We get involved early on new builds so the slab suits the finish
- When the job calls for it, you approve the look from a sample, not a grit number
- A straight answer on what construction damage can and can't be ground out
- Advice on protecting the slab for the rest of the build
- Austin based specialists with more than 20 years in the concrete trade
How Leander Fits Our Regular Route
Leander sits at the northern end of our regular US-183 route, and we book it alongside Cedar Park work so crews get a full day on site. Crystal Falls, Travisso, and Mason Hills are easy to get equipment into for new construction work. In Block House Creek and Sarita Valley homes where people are living, we need clear rooms and a spot to set up the grinder and dust extraction unit. On new construction, we need confirmed power and a clear slab before we bring the equipment out.
What We Find in Leander New Build Slabs
Most Leander calls are about slabs poured in the last fifteen years. Many are in planned communities like Travisso and Mason Hills, where homes are still going up or went up in the last ten years or so. Those slabs usually take a cream finish, where almost no stone shows, or a fine salt and pepper finish with small flecks of stone. We do need the slab protected from the other trades, though.
On new builds in Travisso, we can plan with you before the pour, since the mix, the flatness, and the cure all affect the polished result. If framing and drywall work have already damaged the floor, we check the stains and dings before we tell you how much stone we expect to show.
Areas we cover here
If your job needs samples or mockups, they come to your Leander home or business, since we don't have a showroom or office in town.
How a Polished Concrete Project Runs
Most jobs go through four steps between your first photos and the first day of grinding, and we don't like to rush them.
-
Send details and photos
Your floor area, how you use the space, what's on the floor now, and a few photos of the slab. That's usually enough for a first read on whether polishing is realistic.
-
We check the slab
On site we look at things like hardness, how deep the stone sits, flatness, anything soaked into the concrete, cracks, and old repairs. When the job calls for it, we grind a small test area so you can see your own concrete polished before you choose.
-
We talk through which systems fit
Mechanical polishing, grind and seal, an epoxy coating, or a polishable overlay. We'll make a clear recommendation, even when it's a different system from the one you asked about.
-
Written scope, then the work
Prep, repairs, the finish, treatments, phasing, and anything left out of the job all go on paper first. Then our crew does the work as written. We'll go over dust control for your space during the consultation.
Not sure whether your slab should be polished, overlaid, or coated?
Send us photos and a rough floor area. One of our estimators usually looks them over within 24 business hours and gives you a straight answer.
What Customers Tell Us
Here's what some of our customers have said.
“We removed dated tile in our Barton Creek remodel. The team prepped the uneven slab, walked us through our options, and we ended up with a satin cream finish we really like.”
“As a commercial GC, it's rare to find a flooring trade in Austin that explains the prep and testing this well. They kept us updated on the schedule the whole way through.”
“Honest and straightforward. They tested our 1980s slab, showed us a sample mockup, and explained why polishing suited our open living space better than epoxy.”
Individual results vary based on use, maintenance, and environmental conditions.
Leander Questions
How much does concrete floor polishing cost in Leander?
Can a new Leander home's slab be polished during construction?
How long should a new slab cure before polishing?
What polished concrete finishes work best in Leander homes?
Where can I find a concrete floor specialist near Leander?
Do you charge extra for travel to Leander?
Is polished concrete a good fit for every Leander home?
Still have a question about your floor?
Send it our way, with photos if you have them. We'll get back to you as soon as we can with a straight answer, whether or not you hire us.
Get My Polished Concrete QuoteNear Leander
We schedule nearby communities together, which keeps travel down and makes site visits easy to set up.
Polished concrete in Leander?
Tell us roughly how big the floor is and how you use it, and add a few photos of the slab. We'll look it over and get back to you with a next step.
- We check your slab before we quote
- Your signed proposal spells out what's not included
- We walk you through care in person when the job is done